From the BlogSubscribe Now

04/13/17 A few misconceptions on the Fuji GFX that continue to swirl around the web

I have continued to be impressed with the Fuji GFX.  I finally found a solution to my needs for a longer lens with the older Mamiya 200mm F 2.8 APO lens.  I will be sharing more on that in the future.

What has been a bit disappointing is how some reviewers continue to spread “mis-information”about the GFX.  This seems to have started with some early comments made in regards to the “inability” to not measure a Fuji GF lens for focus shift and now has moved into areas like magnified live view, and manual focus capabilities of the GFX.  It also seems that many of the problems  appear to be from users who have not taken the time to work with the Fuji menu system, which is very similar to the X series cameras from Fuji like the X-T2.

There have been a lot of comments on lack of quality of the Fuji Glass:

My comments are that the optics are excellent, and yes they are light weight but I am happy to have 1/4 the weight of a P1 Schneider LS lens if I can see the same optical quality, which I do with all three of the lenses I have. They are overall excellent to my findings. The 32-64 has a bit of rectinier distortion @ 32mm and on the far left side mine is a bit softer. So I can’t give that lens a 100% great overall review. But so far I have found it to interfere with any photography. The 120mm is amazing and so is the 63mm. The fact that Fuji did not use a LM on the 63mm is a BIG disappointment to me as it’s AF speed is much slower and it will hunt much more often.  The AF in low light could use improvement as it will tend to hunt.

There have been a lot of comments on the issue of baked in sharpening on the Fuji Raw:

If you use non supported raw converters on the Fuji Files, which would have no way of reading anything baked in, the files appear fine and sharpen up just they do in LR. I personally don’t believe it’s possible to bake in a sharpening setting to any file but I will leave it at that. Yes, Fuji bakes in the optical corrections to the files that has always been the case with all Fuji cameras, and yes LR will see these and apply them, there do not include sharpening.  Note to test this open any Fuji GFX raw which has been converted to a dng in Capture One.  Even if the RAF to dng conversion by Adobe keeps the “baked”in sharpening for a raw file, Capture One would not use it period.  Capture One DOES NOT support the GFX thus any form of raw sharpening would be dropped.  To use a converted Fuji dng in C1 you have to totally drop both the company name and camera name so C1 will open the files with it’s information for a Phase IQ250, not a Fuji GFX.

There have been several comments on the fact that Fuji bakes in diffraction corrections to the raw:

If you use any Fuji camera and turn on “lens Optimization” yes, Fuji will bake in diffractions corrections to the jpg files.   These corrections are not supported by raw converters like LR or ACR or even C1 (on the supported x-trans cameras). This has been published many times as these raw converter developers did not want to take the time to figure the algorithm that Fuji used. I have no reason to believe that for some reason, this now works on the RAW for the GFX. I have contacted Fuji US and they have told me the “Lens Optimization” only applies to jpg and “in camera raw” conversions where the Fuji optimization data can be read.

There have been many comments on the lack of ability to use Magnified Live View to manually focus:

Again, it’s possibly that users don’t have a good understanding of Fuji cameras. With Fuji you have two options for the EVF to display the file. As it is with exposure taken into account. And a more wide open max lighted view (display preview off). This 2nd option will give a fully lit view for live view display but you can easily over expose the image since you may forget to read the exposure meter on the far left. With the preview effect off, even in very low natural lighting I have no problems with manual focus in Live View.

There have been many comments on the lack of sharpness in magnified Live View:

Yes, if you zoom in all the way the details will be hard to see. Please understand if you are zoomed in all the way, you have zoomed way past a 100% view, more like 150%. This is similar to attempting to view an image on a D810 in live view with the magnification zoomed all the way in. Net you really can’t tell much. You have 3 zooming options for the Magnified live View, and I tend to use the one in the middle. If you are attempting this without peaking enabled, I believe you will have a lot more trouble determining good focus.

Also, please understand that in preview mode, if you hit the zoom button one time, the camera’s default zoom is WAYYY past a 100% view, and you can’t determine accurate focus. I no of no way currently to dial that one touch zoom down like you can with Nikon. But you can pinch the screen like with an iPhone to shrink the maxed out view back down. In my experience you need to zoom out close to 1/3 of the default view.

I can’t compare to the X1D as Hasselblad is still shipping these in a very limited amount.  I also refuse to place a camera on order and then wait up to 8 months to receive it.  That basically freezes a capital expenditure for my business that I can put to good use elsewhere.  No doubt Hasselblad has totally failed on their ability to deliver this camera in any worthwhile amount.   It’s my opinion that this will possibly have an effect on repairs also as if Hasselblad can’t even make enough cameras to cover orders from as far back as June of 2016, how can you expect to have them repair one.  Also what is the current Hasselblad repair process on the X1D?  Fuji has clearly stated their process of using the current US repair center and has trained current staff on the GFX system.

I just have issues with the fact that it appears that some reviews don’t understand anything about Fuji’s design, and dive in, and then start making claims that the camera is defective, when it’s clear they don’t have a full understanding of Fuji’s focus by wire setup. It’s not perfect but it works.  I made a mistake on the Fuji focus by wire setup on the GFX as I assumed it worked the same as with the other X-series cameras, which is not true.  With any X-series Fuji, if you are in S mode and switch to M for manual focus, you will receive the message “focus check” as many times the movement from S to M, will move the existing focus point throwing your image slightly out of focus.  It is also true with an X-series camera, if you turn off the camera even with the camera in M mode, you will again be asked to “focus check” as the process of powering up the camera will cause you to lose the existing focus point.  With the GFX, I have found that neither of these issues exist.  You can switch from S to M and or turn off the camera and the current focus point is not lost.  I have checked this out a multiple number of times.

If there is a fault for sure the way Fuji designed the neck strap lugs is a bit stupid? They make the use of any other type of strap hard to do and the lug will flip around and get in the way of the memory card door. I prefer to use the Peak Design straps.